darkplanets
Mar 12, 02:14 PM
While I am not a nuclear engineer, I do have a fair amount of knowledge in the area, so with that in mind I can personally say that this will NOT become another Chernobyl situation. Again though as a disclaimer, this is not my career.
With that said, the BWR should be fine. What we saw earlier was the steam blowing apart the structure-- this just means that they didn't do their job in relieving the pressure. The core should be intact, and the reports state that the housing is still in place. When the control rods are inserted into the core, the rods will not melt down, however heat WILL still be produced. In this case, steam. Steam voids moderate fewer neutrons, causing the power level inside the reactor to lower. Furthermore, there should be safety overpressure valves... not sure why these didn't work; they may not be there due to the age of the plant.
To quote wikipedia about BWR safety:
Because of this effect in BWRs, operating components and safety systems are designed to ensure that no credible scenario can cause a pressure and power increase that exceeds the systems' capability to quickly shutdown the reactor before damage to the fuel or to components containing the reactor coolant can occur. In the limiting case of an ATWS (Anticipated Transient Without Scram) derangement, high neutron power levels (~ 200%) can occur for less than a second, after which actuation of SRVs will cause the pressure to rapidly drop off. Neutronic power will fall to far below nominal power (the range of 30% with the cessation of circulation, and thus, void clearance) even before ARI or SLCS actuation occurs. Thermal power will be barely affected.
In the event of a contingency that disables all of the safety systems, each reactor is surrounded by a containment building consisting of 1.2–2.4 m (4–8 ft) of steel-reinforced, pre-stressed concrete designed to seal off the reactor from the environment.
Again; BWR =/= graphite moderated reactor. Why does no one get this?! Everyone will be fine.
Two more bones of contention (which will give you my perspective):
-I personally believe the linear no threshold model is crap, even with the adjustment factor
-I also personally advocate the use of thorium... there's many benefits, melt-down control being one of them (because of MSR)... also although there's still fabrication issues, thorium can be used in existing LWRs. There is also proposed designs where the thorium has to actively be fed into the core, providing a great shutoff mechanism. The only con to this is the fact that thorium is more radioactive than uranium, so it's potentially more dangerous. I think the pros outweigh the cons.
Do you have a link for this? I'd like to read about it. I would think a system setup to automatically scram when power is lost would be the ideal.
Sure! It's really rather cool. (No pun intended)
For starters here (http://en.wikipedia.org/wiki/Boiling_Water_Reactor_Safety_Systems) is the current safety systems that are supposed to be in all BWR, however since this one is from the 80's, it's really hit or miss-- I can't answer that.
New reactor designs have these systems in place-- for example the Westinghouse AP 1000's. (here (http://www.ap1000.westinghousenuclear.com/ap1000_safety_psrs.html))
A general link about passive safety here (http://en.wikipedia.org/wiki/Passive_nuclear_safety).
Basically though, the idea is that human intervention, mechanical or otherwise, is always the weak point in nuclear safety. Instead of relying upon mechanical or man-controlled means, these safety measures employ the laws of physics and thermodynamics, which I hope are always working :D. Many of these systems rely on heat sensitive plugs connected to tanks to flood the chamber or coolant systems via gravity.
With that said, the BWR should be fine. What we saw earlier was the steam blowing apart the structure-- this just means that they didn't do their job in relieving the pressure. The core should be intact, and the reports state that the housing is still in place. When the control rods are inserted into the core, the rods will not melt down, however heat WILL still be produced. In this case, steam. Steam voids moderate fewer neutrons, causing the power level inside the reactor to lower. Furthermore, there should be safety overpressure valves... not sure why these didn't work; they may not be there due to the age of the plant.
To quote wikipedia about BWR safety:
Because of this effect in BWRs, operating components and safety systems are designed to ensure that no credible scenario can cause a pressure and power increase that exceeds the systems' capability to quickly shutdown the reactor before damage to the fuel or to components containing the reactor coolant can occur. In the limiting case of an ATWS (Anticipated Transient Without Scram) derangement, high neutron power levels (~ 200%) can occur for less than a second, after which actuation of SRVs will cause the pressure to rapidly drop off. Neutronic power will fall to far below nominal power (the range of 30% with the cessation of circulation, and thus, void clearance) even before ARI or SLCS actuation occurs. Thermal power will be barely affected.
In the event of a contingency that disables all of the safety systems, each reactor is surrounded by a containment building consisting of 1.2–2.4 m (4–8 ft) of steel-reinforced, pre-stressed concrete designed to seal off the reactor from the environment.
Again; BWR =/= graphite moderated reactor. Why does no one get this?! Everyone will be fine.
Two more bones of contention (which will give you my perspective):
-I personally believe the linear no threshold model is crap, even with the adjustment factor
-I also personally advocate the use of thorium... there's many benefits, melt-down control being one of them (because of MSR)... also although there's still fabrication issues, thorium can be used in existing LWRs. There is also proposed designs where the thorium has to actively be fed into the core, providing a great shutoff mechanism. The only con to this is the fact that thorium is more radioactive than uranium, so it's potentially more dangerous. I think the pros outweigh the cons.
Do you have a link for this? I'd like to read about it. I would think a system setup to automatically scram when power is lost would be the ideal.
Sure! It's really rather cool. (No pun intended)
For starters here (http://en.wikipedia.org/wiki/Boiling_Water_Reactor_Safety_Systems) is the current safety systems that are supposed to be in all BWR, however since this one is from the 80's, it's really hit or miss-- I can't answer that.
New reactor designs have these systems in place-- for example the Westinghouse AP 1000's. (here (http://www.ap1000.westinghousenuclear.com/ap1000_safety_psrs.html))
A general link about passive safety here (http://en.wikipedia.org/wiki/Passive_nuclear_safety).
Basically though, the idea is that human intervention, mechanical or otherwise, is always the weak point in nuclear safety. Instead of relying upon mechanical or man-controlled means, these safety measures employ the laws of physics and thermodynamics, which I hope are always working :D. Many of these systems rely on heat sensitive plugs connected to tanks to flood the chamber or coolant systems via gravity.
rasmasyean
Mar 11, 08:06 AM
I'm in Tokyo. The big shake happened around 3 in the afternoon. I was walking around outside. Returned immediately to my apartment. Lots of broken glass and plates. Books have fallen from the shelf and my office was a mess, but my old mother, dog & cats, and Macs are okay. The aftershocks are continuing.
The damage in Tokyo seems to be fairly light. The situation in Sendai (northern part of Japan) is very serious. It's been hit by tsunami. The TV is showing these helicopter shots of tsunami coming in, and you can actually see cars and buildings and sometimes people being washed away. Can't do anything. I stopped watching TV.
Do they take those "people washed away" videos off Youtube or something right away? All I've seen are the same footages of "stuff" being engulfed by the front. It almost looks as if the entire area has been evacuated prior to this. I tried to find ppl, but I don't see any....unless they like instantly die and sink to the bottom or something or are stuck in the cars.
The damage in Tokyo seems to be fairly light. The situation in Sendai (northern part of Japan) is very serious. It's been hit by tsunami. The TV is showing these helicopter shots of tsunami coming in, and you can actually see cars and buildings and sometimes people being washed away. Can't do anything. I stopped watching TV.
Do they take those "people washed away" videos off Youtube or something right away? All I've seen are the same footages of "stuff" being engulfed by the front. It almost looks as if the entire area has been evacuated prior to this. I tried to find ppl, but I don't see any....unless they like instantly die and sink to the bottom or something or are stuck in the cars.
fat phil
Apr 13, 09:28 AM
The product looks good for what it is, and I read most of the comments here... while I'm not a video guy I am an artist and IT professional and I do have to agree that Apple is strangely moving away from the core pro market that was very loyal. I have seen more and more artists move back to PCs lately and even though I have been moving the other direction, I can't fully blame them.
I know Apple has a plan and they stick to their guns, but I just think they may be shooting themselves in the foot by going so fully consumer market. Avid has a lot more as far as hardcore features and scalability. Apple has basically dropped their server line and they are on a path of dumbing down many apps to fit a more iPad/App market. They are still powerful and "pro" apps but much of the scalability and truly "pro" features seem to be dwindling day by day. That's my concern.
I don't think they're deliberately setting out to hurt the Pro users in this case - they genuinely think they've found a better way to work. If it's true then it's all good.
Even if they were trying to open up the userbase, it doesn't take Stephen Hawkins to figure out why they'd want to.
2,000,000 Pro users @ $600
or
10,000,000 "casual" users + 2,000,000 Pro users @ $300
Yeah. I'd do it too...:)
I know Apple has a plan and they stick to their guns, but I just think they may be shooting themselves in the foot by going so fully consumer market. Avid has a lot more as far as hardcore features and scalability. Apple has basically dropped their server line and they are on a path of dumbing down many apps to fit a more iPad/App market. They are still powerful and "pro" apps but much of the scalability and truly "pro" features seem to be dwindling day by day. That's my concern.
I don't think they're deliberately setting out to hurt the Pro users in this case - they genuinely think they've found a better way to work. If it's true then it's all good.
Even if they were trying to open up the userbase, it doesn't take Stephen Hawkins to figure out why they'd want to.
2,000,000 Pro users @ $600
or
10,000,000 "casual" users + 2,000,000 Pro users @ $300
Yeah. I'd do it too...:)
saving107
Apr 15, 10:02 AM
Later on in life, most of them will probably have a beer with you and apologize.
If you want to really take on bullying, you need a totally different kind of campaign.
I got the impression that this campaign was not for Bully Awareness, but to let those who are getting bullied know that "It gets Better" and to guide you to the right place if you need someone to talk to before things get worse.
If you want to really take on bullying, you need a totally different kind of campaign.
I got the impression that this campaign was not for Bully Awareness, but to let those who are getting bullied know that "It gets Better" and to guide you to the right place if you need someone to talk to before things get worse.
jiggie2g
Mar 18, 03:23 PM
DVD Jon is unstoppable this guy could crack a Diamond.
Th3Crow
Apr 28, 09:00 AM
Agree. Too bad the iMac never took off in the enterprise sector. I remember when I was going to the university in the 90's I saw plenty of macs all around campus. Now the times I've gone all I see are Dell's, and HP's.
I don't know what you're talking about. I work at a university, and I have watched as Macs have become more and more abundant. It used to be that one only saw Macs in niche programs, like Music or Film Studies. Now, one in three commerce and MBA students have MacBook Pros. Half of the Engineering profs have Mac laptops, and about a third of those students. Macs have exploded in the last 10 years, almost exponentially.
I don't know what you're talking about. I work at a university, and I have watched as Macs have become more and more abundant. It used to be that one only saw Macs in niche programs, like Music or Film Studies. Now, one in three commerce and MBA students have MacBook Pros. Half of the Engineering profs have Mac laptops, and about a third of those students. Macs have exploded in the last 10 years, almost exponentially.
Multimedia
Oct 31, 05:01 PM
Can you elaborate on that? I have a pending Mac Pro purchase for my recording studio, based on Pro Tools, and I can't decide if I would benefit from the additional cores. I know Pro Tools can't utilize more then 2 at a time, but I'm wondering if all the additional processing (virtual effects, instruments, etc) would get a boost...Think long term. All the pro software is being re-written right now to take advantage of more cores at once. So short term you're right. But knowing how processor intensive music applications in particular are, not unlike video application compression work, you're gonna be glad you waited for the 8-core intstead - if you can wait since we don't really know the WHEN part for sure. Guessing November 14th don't make it so til the release hits the web. :)
Bill McEnaney
Mar 27, 04:41 PM
Has he published anything in a peer-reviewed scientific journal of high (or even average) standing?
That's your favorite question, isn't it, EH? ;) I'll look for a bibliography.
That's your favorite question, isn't it, EH? ;) I'll look for a bibliography.
MacCoaster
Oct 13, 04:16 AM
Overclocked my Athlon 1.4GHz Tbird to 1.522GHz, benchmark results (under C#, which was fastest) did an average of 7390 milliseconds (7.39 seconds). w00t!
Gotta love overclocking.
Gotta love overclocking.
SMM
Oct 21, 12:52 PM
It will come, just not with the initial production models. With the quad-core chips, Intel is already running into FSB bandwidth issues as it is. The Clovertowns are essentially dual Woodcrest CPUs stuck on the same die, sharing the same FSB and communication between the first duo-core CPU and the second duo-core CPU on that die must travel onto the FSB and into the other CPU. Between the two cores that are linked directly, data sharing can be handled through the L1 cache. So, depending on your application, the 8-core may be no better than a 4-core system -- if what your'e doing is already maxing out your CPU bus bandwidth. Somwhere down the road as Intel shifts to its 45nm production process and fully integrates all 4 cores on a single CPU (and later, 8 cores on die), we will see massive improvements in inter-core bandwidth. They will have to step-up on the FSB bandwidth though... Possibly by increasing the MHz, but more than likely we'll see some of that combined with increasing the width of the data path and possibly using multiple parallel FSB designs. ...Going to be interesting, that's for sure. And with Intel's new process and the plans for continuously jamming more cores onto a die at higher speeds, I think we're in for a real ride over the next 5 years or so.
Absolutely agree. It must be exciting to be an EE working on this stuff right now. So many options to explore. How would you design a memory bus which would be dynamic enough to adjust for a doubling of processors? If you had a fixed, known number of processors, the design is straight-forward. But, the new multi-core design is not something they have had to deal with before. I wonder how they will do it?
Absolutely agree. It must be exciting to be an EE working on this stuff right now. So many options to explore. How would you design a memory bus which would be dynamic enough to adjust for a doubling of processors? If you had a fixed, known number of processors, the design is straight-forward. But, the new multi-core design is not something they have had to deal with before. I wonder how they will do it?
beaster
Sep 12, 04:16 PM
But at what quality??? Q1 2007 is as late as end of March. HD-DVD came out in April and BluRay in -- what -- May? So almost a year later Apple introduces a device that will play *near* (i.e. lower than) DVD-quality when the market is finally warming up to HD quality disks.
Regular DVD is 480i. Say that near-dvd quality is 420i. It will look like crap on that "big screen plasma" Jobs talked about.
He's marketing it to someone who will plug it into a $5K+ TV. At that price point, give us HD playback, both optical and streaming/downloaded, legally. I'd be happy to pay double or triple for a box that does it smoothly.
Agreed. If it can't do HD, I'll pass.
-Sean
Regular DVD is 480i. Say that near-dvd quality is 420i. It will look like crap on that "big screen plasma" Jobs talked about.
He's marketing it to someone who will plug it into a $5K+ TV. At that price point, give us HD playback, both optical and streaming/downloaded, legally. I'd be happy to pay double or triple for a box that does it smoothly.
Agreed. If it can't do HD, I'll pass.
-Sean
Denarius
Mar 15, 09:19 PM
A cold comfort considering it is now already thought to be close to a level 6 incident on the INES scale. :(
Yes, you're right, it's still unstable and still has the potential to become a real disaster. I was more working from the angle that this is the result of a truly devastating natural disaster: a real freak of nature. Calling the safety of nuclear energy in general into question on the back of it is silly.
Yes, you're right, it's still unstable and still has the potential to become a real disaster. I was more working from the angle that this is the result of a truly devastating natural disaster: a real freak of nature. Calling the safety of nuclear energy in general into question on the back of it is silly.
Clive At Five
Aug 29, 12:59 PM
Yeah, cause you just HAVE to hunt whales and eat whalemeat in Norway in order to survive, such a poor country with poor people. How dare Greenpeace oppose your ancient way of life?
Have you read what you just wrote? Who said anything about hunting whales? Eating whale meat? Or being poor?
No one.
Conclusion? You're bigoted.
There's no denying that Greenpeace is further towards "Extremist" than towards "Moderate." That's the jist of what he's saying, and he's right.
-Clive
Have you read what you just wrote? Who said anything about hunting whales? Eating whale meat? Or being poor?
No one.
Conclusion? You're bigoted.
There's no denying that Greenpeace is further towards "Extremist" than towards "Moderate." That's the jist of what he's saying, and he's right.
-Clive
kingtj
Aug 28, 10:46 AM
I *almost* feel guilty bashing AT&T at times, because 2 of my good friends have worked for them for years. But the company ALWAYS manages to infuriate me enough that I can't help myself. One of the two of them USED to try to defend AT&T when I started in on it, but even he has given up now - because the situations I keep describing to him are ones he simply can't make excuses for.
Here in St. Louis, MO - we don't have the notorious dropped call problems of parts of downtown Chicago or New York City, but it's still pretty bad! I had the original iPhone and then the 3G, and I could expect it to lose about every other call I made or answered. I can't say the iPhone's design didn't contribute to it, but all I know is, my friends on AT&T's network using other phones like the Motorola Razr told me they experienced pretty much the same thing.
We were using AT&T for cellphones, T1 data and voice circuits and regular land-lines where I work, plus advertising in the AT&T Yellow Pages, and NONE of it has been a good experience!
My "dedicated key corporate account representative" is notorious for never answering her office phone and not returning phone calls. SOMETIMES she'll email you a reply to a question or request after a few days, and other times? She might just forward it to someone else in her dept. who may or may not follow up. About the only time she made an appearance and acted like she cared was when AT&T gave her a "mission", such as getting her corporate customers to answer and send back some survey they were putting together. It was like pulling teeth to even get the company to call back to remind us when contracts were up for renewal!
Every year, we seem to have a new Yellow Pages sales rep. because whoever was assigned to us before has moved on to a new job.... It gets really old re-explaining everything about the business every year.
On the iPhone accounts, AT&T can't even seem to figure out what some of their pricing plans are for!? One of our iPhones was being billed about $10 a month more than the others because they configured it on a "corporate" plan they claimed was necessary for using it with our Exchange server. (Funny, but Exchange email worked just fine without this "extra" on the other phones!) When I questioned them, they couldn't pin down a reason for the "up charge". I finally determined it was simply an extra fee AT&T likes to try to talk businesses into paying, yet it serves no real purpose. It's probably just based on some theory that iPhone users connected to corporate Exchange servers will use more data than other people, so they'd like to get more money out of them. I finally got someone to remove the charge and the phone still works exactly like it did before!
I have consistently had problems with dropped calls ever since I switched from the original iPhone to the iPhone 3GS, they replaced my phone twice because of it. It would work for a while, but then drop calls, or get 10 call failures before actually placing a call, just to be dropped minutes later...
Yesterday I finally upgraded to 4.0.2 and it is even worse! Not only do I barely get any signal in my house, even when it shows I have a signal it still doesn't work. The problem seems to be when it goes into sleep mode it disconnects, because when I unlock it, a swarm of text messages and voice mails from missed calls I never received pour in...
I finally called up AT&T to see if there was anything they could do (maybe give me one of the femtocells to keep my 5 iPhone family plan happy (bill is almost $300 a month)... I was greeted by an unfriendly and unhelpful customer service agent. She pretty much told me there was nothing she could do (and when I asked about the femtocell she had no idea what it was, didn't even offer for me to buy it), and then she said its just the network, it happens to her all the time, I am probably in an area with poor coverage.
I told her to look it up on the AT&T coverage map it shows "best coverage" all around my house and where I live, pretty much most of Long Island. To which she said "coverage is not at all guaranteed", I flipped a bird and said "what the fu*k does that even mean, so I can get an at&t phone and pay for the service and you can't even guarantee I get service in any location around the world, even if you advertise it" to which she responded "yup". And I said, that's just ridiculous, I might as well switch to a carrier such as sprint or verizion (my parents have one of each) and they get service in our household. And then she said "Go ahead and switch". I don't remember exactly what I said after that, but she followed with other dumb remarks, such as, it could just be what your house is made of, or do you live underground? I'm sure I live in a cave lady... But I really can't bash all the Customer service agents at AT&T, some are great and very helpful.
Never the less, I was very pissed and disappointed with how AT&T is handling itself. Never have I had such poor customer service. When I had nextel and complained about their crappy service, they were very apologetic and offered me free stuff, and even if I never mentioned dropping them, but even hinted at the possibility, they would offer me upgrades and the works just to keep me... AT&T is just hit or miss, when the network works, its great and super fast, but if your in a high traffic or any other area, its the pits... Which is why I think people on the forums have such a hard time understanding these complaints. I bet the reason for the big change in satisfaction surveys has to do with geographic location. When I was in any other state but NY the service worked when it said I had service, but even then I could have full service, travel 10ft and get No service to show up on the iPhone, very spotty at best.
I am definitely going to switch my entire family plan over to verizion when our contracts are up in a year, I really hope they get the iPhone, if not, droid here I come! But to the rest of the community, has this ever happened to anyone else but me? Should I call back AT&T, at this point I would be willing to buy the femtocell, my phone doesn't work in passive mode, only gets service when I am on it and unlocked.
EDIT:
I actually looked up the femtocell, which is now called microcell to make sure I wasn't going crazy and to see if it is available in my area (which it is), and I saw a video that I just find hilarious! If you go to the following link and click on "increased signal strength" in the interactive video that loads on AT&T website for the microcell, it starts to play a video that actually shows how crappy their service is, with the guy having to hang out of the window to make a call... WTF? AT&T should fire whoever makes their commercials...
Check it out: http://www.wireless.att.com/learn/why/3gmicrocell/
Here in St. Louis, MO - we don't have the notorious dropped call problems of parts of downtown Chicago or New York City, but it's still pretty bad! I had the original iPhone and then the 3G, and I could expect it to lose about every other call I made or answered. I can't say the iPhone's design didn't contribute to it, but all I know is, my friends on AT&T's network using other phones like the Motorola Razr told me they experienced pretty much the same thing.
We were using AT&T for cellphones, T1 data and voice circuits and regular land-lines where I work, plus advertising in the AT&T Yellow Pages, and NONE of it has been a good experience!
My "dedicated key corporate account representative" is notorious for never answering her office phone and not returning phone calls. SOMETIMES she'll email you a reply to a question or request after a few days, and other times? She might just forward it to someone else in her dept. who may or may not follow up. About the only time she made an appearance and acted like she cared was when AT&T gave her a "mission", such as getting her corporate customers to answer and send back some survey they were putting together. It was like pulling teeth to even get the company to call back to remind us when contracts were up for renewal!
Every year, we seem to have a new Yellow Pages sales rep. because whoever was assigned to us before has moved on to a new job.... It gets really old re-explaining everything about the business every year.
On the iPhone accounts, AT&T can't even seem to figure out what some of their pricing plans are for!? One of our iPhones was being billed about $10 a month more than the others because they configured it on a "corporate" plan they claimed was necessary for using it with our Exchange server. (Funny, but Exchange email worked just fine without this "extra" on the other phones!) When I questioned them, they couldn't pin down a reason for the "up charge". I finally determined it was simply an extra fee AT&T likes to try to talk businesses into paying, yet it serves no real purpose. It's probably just based on some theory that iPhone users connected to corporate Exchange servers will use more data than other people, so they'd like to get more money out of them. I finally got someone to remove the charge and the phone still works exactly like it did before!
I have consistently had problems with dropped calls ever since I switched from the original iPhone to the iPhone 3GS, they replaced my phone twice because of it. It would work for a while, but then drop calls, or get 10 call failures before actually placing a call, just to be dropped minutes later...
Yesterday I finally upgraded to 4.0.2 and it is even worse! Not only do I barely get any signal in my house, even when it shows I have a signal it still doesn't work. The problem seems to be when it goes into sleep mode it disconnects, because when I unlock it, a swarm of text messages and voice mails from missed calls I never received pour in...
I finally called up AT&T to see if there was anything they could do (maybe give me one of the femtocells to keep my 5 iPhone family plan happy (bill is almost $300 a month)... I was greeted by an unfriendly and unhelpful customer service agent. She pretty much told me there was nothing she could do (and when I asked about the femtocell she had no idea what it was, didn't even offer for me to buy it), and then she said its just the network, it happens to her all the time, I am probably in an area with poor coverage.
I told her to look it up on the AT&T coverage map it shows "best coverage" all around my house and where I live, pretty much most of Long Island. To which she said "coverage is not at all guaranteed", I flipped a bird and said "what the fu*k does that even mean, so I can get an at&t phone and pay for the service and you can't even guarantee I get service in any location around the world, even if you advertise it" to which she responded "yup". And I said, that's just ridiculous, I might as well switch to a carrier such as sprint or verizion (my parents have one of each) and they get service in our household. And then she said "Go ahead and switch". I don't remember exactly what I said after that, but she followed with other dumb remarks, such as, it could just be what your house is made of, or do you live underground? I'm sure I live in a cave lady... But I really can't bash all the Customer service agents at AT&T, some are great and very helpful.
Never the less, I was very pissed and disappointed with how AT&T is handling itself. Never have I had such poor customer service. When I had nextel and complained about their crappy service, they were very apologetic and offered me free stuff, and even if I never mentioned dropping them, but even hinted at the possibility, they would offer me upgrades and the works just to keep me... AT&T is just hit or miss, when the network works, its great and super fast, but if your in a high traffic or any other area, its the pits... Which is why I think people on the forums have such a hard time understanding these complaints. I bet the reason for the big change in satisfaction surveys has to do with geographic location. When I was in any other state but NY the service worked when it said I had service, but even then I could have full service, travel 10ft and get No service to show up on the iPhone, very spotty at best.
I am definitely going to switch my entire family plan over to verizion when our contracts are up in a year, I really hope they get the iPhone, if not, droid here I come! But to the rest of the community, has this ever happened to anyone else but me? Should I call back AT&T, at this point I would be willing to buy the femtocell, my phone doesn't work in passive mode, only gets service when I am on it and unlocked.
EDIT:
I actually looked up the femtocell, which is now called microcell to make sure I wasn't going crazy and to see if it is available in my area (which it is), and I saw a video that I just find hilarious! If you go to the following link and click on "increased signal strength" in the interactive video that loads on AT&T website for the microcell, it starts to play a video that actually shows how crappy their service is, with the guy having to hang out of the window to make a call... WTF? AT&T should fire whoever makes their commercials...
Check it out: http://www.wireless.att.com/learn/why/3gmicrocell/
Kebabselector
Mar 18, 08:02 AM
I get: 2000 any network-any time minutes, 5000 same network minutes, 5000 any network messages, UNLIMITED internet, that's right, no capping, no "fair usage policies", UNLIMITED! AAAAND I can tether with up to 5 devices,
True, but once you move away from a major city 3's network is rather crap.
To be fair it's a good deal, but good luck leaving 3 when you decide to move on. Their call centres are awful to deal with.
True, but once you move away from a major city 3's network is rather crap.
To be fair it's a good deal, but good luck leaving 3 when you decide to move on. Their call centres are awful to deal with.
Free2B
Aug 30, 11:39 AM
Maybe someone has mentioned this, but I find it extremely ironic that Greenpeace is hitting up Apple, where none other than Al Gore is on the board!! Can Apple really be that bad? (oh, they were 4th worst out of about 20 companies.) So, either Al Gore doesn't put his money where his mouth is, or Greenpeace is just trying further its anti-corporate agenda. Maybe both???
DeepDish
Aug 29, 11:03 AM
How do we know this Greenpeace report is accurate?
Sometimes activist organizations will target big name companies just to get more attention.
Apple is more green than dell. period.
Makes me question the whole report if greenpeace thinks dell is more green then apple.
bunch of hewwie
Sometimes activist organizations will target big name companies just to get more attention.
Apple is more green than dell. period.
Makes me question the whole report if greenpeace thinks dell is more green then apple.
bunch of hewwie
OllyW
Apr 28, 01:27 PM
It would help the iPad, in the manner you are describing it, if, like an Android/Honeycomb tablet it was a machine in it's own right.
If you look at the way it works, and the way Apple have designed the OS, it's obvious that Apple do not see the iPad as an independent PC, and that Apple themselves see it, and have designed it to be just an extension of your "Real" personal computer.
We are having to rely on 3th party apps to get around Apple's official built in limitations for the device, It's linked totally to just one computer running iTunes, you can't even connect it to say your PC, your friends, PC and your works PC to upload and download data to and from the various machines.
The iPad, as designed, with Apples official software is made so that you set thing up and organise things on your PC or Mac, then you dock your iPad (your mobile extension of your PC) you do a few things, then you come back, re-dock the iPad and it get's backed up.
That's the device that Apple made and how they see it.
It's not the iPad's fault. It's how Apple have made it.
The fact that with some 3rd party apps you can extend it's functionality beyond how Apple see the device is neither here nor there.
Personally, I very VERY much hope Apple do allow the iPad to grow into a fully independent device and break it's lock down link to iTunes.
Unfortunately, seeing as the iTunes link is Apple's money making link, I cannot see them allowing this to happen for a long time, meaning it will never grow to it's full potential as a fully independent device.
Well put.
This is why I don't think it's a PC. It's getting there but it's still too restricted in it's current guise.
If you look at the way it works, and the way Apple have designed the OS, it's obvious that Apple do not see the iPad as an independent PC, and that Apple themselves see it, and have designed it to be just an extension of your "Real" personal computer.
We are having to rely on 3th party apps to get around Apple's official built in limitations for the device, It's linked totally to just one computer running iTunes, you can't even connect it to say your PC, your friends, PC and your works PC to upload and download data to and from the various machines.
The iPad, as designed, with Apples official software is made so that you set thing up and organise things on your PC or Mac, then you dock your iPad (your mobile extension of your PC) you do a few things, then you come back, re-dock the iPad and it get's backed up.
That's the device that Apple made and how they see it.
It's not the iPad's fault. It's how Apple have made it.
The fact that with some 3rd party apps you can extend it's functionality beyond how Apple see the device is neither here nor there.
Personally, I very VERY much hope Apple do allow the iPad to grow into a fully independent device and break it's lock down link to iTunes.
Unfortunately, seeing as the iTunes link is Apple's money making link, I cannot see them allowing this to happen for a long time, meaning it will never grow to it's full potential as a fully independent device.
Well put.
This is why I don't think it's a PC. It's getting there but it's still too restricted in it's current guise.
iJohnHenry
Apr 23, 07:58 PM
Er?
Yarweh uses Windows
Allah is still on CP/M
The Buddah uses Unix
And Atheists use Macs?
Yahweh uses stone tablets.
Allah uses an abacus.
Buddha uses food.
Yes, and leaders, not followers, use Macs.
:p
Yarweh uses Windows
Allah is still on CP/M
The Buddah uses Unix
And Atheists use Macs?
Yahweh uses stone tablets.
Allah uses an abacus.
Buddha uses food.
Yes, and leaders, not followers, use Macs.
:p
Multimedia
Oct 26, 01:21 AM
MacOSX scales very poorly compared to (say) Linux, Irix, or AIX, owing to its Mach underpinnings. 8 cpus won't get you much over 4 until Apple rips out the Mach guts and replaces it.I don't believe you. I use applications that want 3-4 cores EACH. And I need to run 2-4 of them simultaneously. No way is Apple going to ship dual Clovertowns if they provide no benefit. I think AppliedVisual also does not believe you. In other words:
You may be mistaken.
You may be mistaken.
jiggie2g
Jul 12, 05:47 PM
those things make no functional difference, you completely missed the point which was totally about motherboard design, which other than the case and sometimes the cpu is always unique on macs no matter if they are ppc or intel
This is no longer the case Hector , same CPU , same stupid Intel Chipset , a custom design Mac Mobo is no different from an Asus / DFI / MSI board , in a sense they are all customized however all derived from the same chipset. So this make no difference other then small tweaks apple might make , just like the other vendors make thiers through bios updates. Apple is not going to get a custom Core 2 /Xenon , aside from the case / mainboard / OSX , there is nothing in a mac i can't buy on newegg.
This is no longer the case Hector , same CPU , same stupid Intel Chipset , a custom design Mac Mobo is no different from an Asus / DFI / MSI board , in a sense they are all customized however all derived from the same chipset. So this make no difference other then small tweaks apple might make , just like the other vendors make thiers through bios updates. Apple is not going to get a custom Core 2 /Xenon , aside from the case / mainboard / OSX , there is nothing in a mac i can't buy on newegg.
pianodude123
Sep 26, 05:57 PM
And the wait for 8 Core Mac Pros and Merom MacBook Pros/MaBook is on ;)
Waiting for speed bumps means no one buys a dang thing :cool:
at least the educated do not....
Well...it's amazing that now every dual core computer is obsolete, and every single core computer is like an Apple II compared to this.
Waiting for speed bumps means no one buys a dang thing :cool:
at least the educated do not....
Well...it's amazing that now every dual core computer is obsolete, and every single core computer is like an Apple II compared to this.
Sounds Good
Apr 5, 06:21 PM
Under the Apple menu on the top toolbar, you can access both recently used programs and recently used files just the same as in the Windows Start menu.
Ahh, good. Thanks. Are we able to put our "favorite" programs or files there too, like on the Windows Start menu? (even if they are not the most recently used?)
It's essentially the same thing, but better.
Why / how is it better?
Ahh, good. Thanks. Are we able to put our "favorite" programs or files there too, like on the Windows Start menu? (even if they are not the most recently used?)
It's essentially the same thing, but better.
Why / how is it better?
malohkan
Oct 7, 11:47 AM
I think the realistic expectation is: "If Apple doesn't make any more changes to the iPhone for the next 10 years, there will be an Android phone to beat it by 2020!!"
I feel like the trend is going to stay the same as it was with the G1. They're like "ooo look at our neat new features!!" Unfortunately, the iPhone/iPod just got those features, only better, just before you launched.
The competition just can't stay ahead, and Apple is going to keep it that way.
I feel like the trend is going to stay the same as it was with the G1. They're like "ooo look at our neat new features!!" Unfortunately, the iPhone/iPod just got those features, only better, just before you launched.
The competition just can't stay ahead, and Apple is going to keep it that way.